Infinix Hot S3X X622 EDL Test Point Schematics
How to force Infinix Hot S3x X622 into EDL mode using test points
Infinix Hot S3X X622 EDL Test Point Schematics
If you have been trying to get your Infinix Hot S3x X622 (Qualcomm Snapdragon) into Emergency Download or EDL mode (so you can bypass FRP or flash firmware) using button combo or even EDL cable then you must have noticed that it just doesn’t work.
To force the phone into EDL mode, you need to disassemble it down to the board,
power of the device then join the two points in the image below then connect to the PC via USB cord.
Check device manager
>
under ports (COM & LPT) your devices should be seen there in Qualcomm Hs-Usb qd loader Mode.
Refer to this Guide HERE on how to install qualcomm drivers.
Infinix Hot S3X Key Features
| Model Name | Hot S3X |
| Screen Size | 6.2″ FHD IPS Display |
| Processor | Octa Core, 1.4GHz |
| RAM | 3/4GB |
| ROM | 32/64GB |
| Camera Resolution | 13MP + 2MP Rear, 16MP Front Camera |
| Battery | 4000 mAh battery capacity |
| 4G LTE | Yes |
| Dual SIM | Yes |
Post a Comment